The new Sessiondesk Speaker Stand Porto-V provides the most flexible and acoustically optimized solution for your speakers. The heavy construction of POLIPLEX and steel makes the stand stable and non-resonating for the clearest speaker signal. The extensive adjustment possibilities put your speakers always in perfect position.
The Porto-V's head is adjustable in height from 82 cm to 124 cm at intervals of 6cm. A 15mm finetuning is possible by adjusting the feet.
The angle of the head can be adjusted from 0° to 3° and 5°, so your speakers will always be in the ideal position.
You can turn the head plate depending on your desired speaker position. Either upright or horizontal.
One Porto-V Speaker Stand can take up to 35 kg, that is around 77 lbs. For more heavy speakers two Porto-V can be used for one.
As a standard, every Porto-V is equipped with SuperSpikes from the Norwegian company Soundcare. They improve low-frequency control, transparency and overall distortion.
A massive core provides the speaker stand with the necessary weight and stability. 25 kg (55 lbs.) of hand-welded steel are pressing the Porto-V to the ground and preventing it from resonating.
All cables for your speakers run through a duct in the back and an opening in the foot - keeping your working area clean. With two additional screws your audio and power cables are kept within the stand.
A durable, strong and beautiful material, exclusively provided by Sessiondesk. It consist of a strong MPX-board, covered with a matte, but highly resistant covering.
The head plate is covered with a specifically chosen anti-slip rubber, to keep your precious speaker in position, even when the head is tilted.
The shape of the Porto-V matches prefectly the Sessiondesk Modularsystem's outlines. So it is possible to put it as close as needed.
|130121||A Pair of Porto-V's||1.111,00 €|